Date: 1-Nov-17 Fixed a bug that would use liquor instead of water to produce steam if liquor proceeded water in the stream definition. Fixed a bug in the Evaporator module that would cause an access violation if stream definition did not have Steam or Water. Miscellaneous improvements made to the Digester module. New Release Version No. Read More …

Date: 30-Dec-16 Fixed an incompatibility with HASP drivers v7.52 which could cause CADSIM to fail to find a valid CADSIM Plus HASP key. New Release Version No. : 3.1.17 Date: 8-Dec-16 Fixed a bug which caused External Optimizer INIT values to be overwritten by startup file values. New Release Version No.: 3.1.16 Date: 30-Nov-16 Fixed a bug which caused a “bad Read More …

Date: 13-Jan-17  Fixed an incompatibility with HASP drivers v7.52 which could cause CADSIM to fail to find a valid CADSIM Plus HASP key. New Release Version No.: 3.0.29 Date: 24-Feb-16 Relocated CSPlus.err and Verbose.log files (if they are created) to My CADSIM\LOG folder, for compatibility with Windows 8.x or later. New Release Version No. : 3.0.28 Date: 15-Feb-16 Fixed a a Read More …

Date: 02-Jul-14 Miscelaneous improvements to FLASH and PUMP units. New Release Version No. : 2.7.11  Date: 16-Jun-14 Improved flow network convergence for the CLEANERS unit (Fiber Library). New Release Version No. : 2.7.10  Date: 28-May-14 Fixed a problem with the PROPERTIES module that could cause a crash if looking up Freezing Point Depression of an ORGANIC compound. Fixed a bug Read More …

Date: 24-Sep-13 Fixed a bug which prevented the Controller Variable specification type from being enabled, when TEMPERATURE is the free variable. New Release Version No. : 2.6.14  Date: 30-Jul-13 Fixed a problem that could cause parts to be scaled twice when inserted into a drawing. New Release Version No. : 2.6.13  Date: 28-Jun-13 Made a number of improvements to allow Read More …

Date: 02-Mar-12 Increased the maximum number of layers in the TOWER unit from 200 to 2000. New Release Version No. : 2.5.20  Date: 09-Sep-11 Fixed a problem which caused the Insert Part list to not be refreshed when a new CADSIM part is created (the new part was not added to the list). Fixed a bug which could Read More …